HettCube 400 R

Enhancing lab space efficiency

Choose product:

HettCube 400HettCube 400 R

Download data sheet

Facts & Figures

Cat.No.: 64005

710 x 825 x 1,425 mm

Dimensions (WxDxH)

IVDR

Model

310 l

Internal volume

199 l

Validated usable space

3 (2 Standard + 1 HTS)

Number Of Provided Trays

0.046 kWh/h

Energy consumption

Product description Advantages Areas of applications Accessories Contact

Enhancing lab space efficiency

Environmentally friendly, economical and well designed.

With its volume and wide range of accessories the HettCube 400 incubator is well suited for all pharmaceutical and research applications.

This incubator is available with refrigeration and a temperature range from 0 °C to +65 °C.

Advantages

Intuitive operation with the new touchscreen

Maintain control over the entire incubation process - at a glance!

The clear dashboard shows the target and actual display, the status of the device as well as an overview of all events and alarm messages from the past month.

Flexible settings for more sample safety

Numerous events and alarm functions are individually adjustable to protect your samples even in case of power failure.

Deviations from the target temperature can be limited individually and asymmetrically with tolerance band limits or defined via the temperature selection monitor of class 3.1 and 3.2.

Maximum usable space with the smallest footprint

The slim design requires little space. This offers you up to 50 % more usable space with the same footprint.

In addition, Hettich incubators with their gentle airflow guarantee stable and homogeneous temperatures in a considerably larger part of the interior, and thus offer 30 % more validated usable space.

Optimal growth conditions

Less risk of drying out and a uniquely stable and even temperature control of your cultures, due to the advantages of a combined natural and forced convection.

Highest ease of use

By integrating only one door, you get fast and convenient access with just one hand.

In addition, the Hettich Telescope System (HTS) with its telescopic slides gives you effortless access to your samples.

HettCube incubators with their remarkably low noise level of ≤ 44 dB(A) are no louder than a normal conversation.

Simple intuitive touchscreen

Keep control of your entire incubation process- at a glance!

This is made possible by a 4.3 inch touchscreen with its clear dashboard. In addition to the target and actual display, statuses of the device as well as an overview of all events and alarm messages can be shown. Any irregularities caused by door openings and tolerance band violations are additionally documented as in the logbook.

Areas of applications

Clinical microbiology, clinical monitoring

Clinical specimen taken from patients or obtained in the course of hygienic monitoring of hospitals are incubated to identify bacteria, fungi, and yeast.

Facilities

Microbiological labs
Hospital labs

The right accessories for this incubator

Shelf (Set), Hight 59 mm

Made of stainless steel
With standard rails
Max. load: 50 kg

Cat.No.: 60001

Shelf (HTS-Set), Hight 54 mm

The Hettich Telescope System allows the internal space of the HettCube to be used optimally. Telescopic rails make it easy to work and permit use of the entire surface area. Even samples that are way in the back can be easily reached.

Made of stainless steel
Telescopic pull-out up to 70 %
Max. load: 40 kg

Cat.No.: 60031

Drawer (HTS-Set), Hight 30 mm

Made of stainless steel
Telescopic pull-out up to 70 %
Max. load: 40 kg

Cat.No.: 60024

Drawer (HTS-Set), Hight 65 mm

Made of stainless steel
Telescopic pull-out up to 70 %
Max. load: 40 kg

Cat.No.: 60025

Drawer (HTS-Set), Hight 105 mm

Made of stainless steel
Telescopic pull-out up to 70 %
Max. load: 40 kg

Cat.No.: 60026

Rack for Petri dishes (HTS-Set), Hight 117 mm

The Petri dish rack allows large numbers of cultures to be processed quickly and economically. The rack has been specially developed to make the handling of Petri dishes easier.

Made of stainless steel and autoclavable
Telescopic pull-out up to 70 %
Max. load: 90 Petri dishes (Ø 90 mm)

Optimum use of valuable space:
Up to two racks and thus 180 Petri dishes are possible per pair of rails. Fully loading the HettCubes with the racks results in the following capacities:

HettCube 200	HettCube 400	HettCube 600
2 racks = 360 Petri dishes	5 racks = 900 Petri dishes	9 racks = 1620 Petri dishes

Note: For covering the entire slide-in level, the additional selection of Cat.No. 60040 is necessary.

Cat.No.: 60038

Rack for Petri dishes (Set), Hight 117 mm

The Petri dish rack allows large numbers of cultures to be processed quickly and economically. The rack has been specially developed to make the handling of Petri dishes easier.

Made of stainless steel and autoclavable
Max. load: 90 Petri dishes (Ø 90 mm)

Optimum use of valuable space:
Up to two racks and thus 180 Petri dishes are possible per pair of rails. Fully loading the HettCubes with the racks results in the following capacities:

HettCube 200	HettCube 400	HettCube 600
2 racks = 360 Petri dishes	5 racks = 900 Petri dishes	9 racks = 1620 Petri dishes

Note: For covering the entire slide-in level, the additional selection of Cat.No. 60040 is necessary.

Cat.No.: 60039

Rack (HTS-Set), Hight 24 mm

Ideally suited for the Loewenstein Method
Inclination angle: 5°
Made of stainless steel and autoclavable
Telescopic pull-out up to 70 %

Optimum use of valuable space:
The max. load per rack is 81 tubes (Ø 15-20 mm, length 160 mm). Fully loading the HettCubes with the racks results in the following capacities:

HettCube 200	HettCube 400	HettCube 600
3 racks = 243 tubes	8 racks = 648 tubes	14 racks = 1134 tubes

Cat.No.: 60036

Rack (Set), Hight 24 mm

Ideally suited for the Loewenstein Method
Inclination angle: 5°
Made of stainless steel and autoclavable

Optimum use of valuable space:
The max. load per rack is 81 tubes (Ø 15-20 mm, length 160 mm). Fully loading the HettCubes with the racks results in the following capacities:

HettCube 200	HettCube 400	HettCube 600
6 racks = 486 tubes	16 racks = 1296 tubes	29 racks = 2349 tubes

Cat.No.: 60037

Rack, Hight 24 mm

Ideally suited for the Loewenstein Method
Inclination angle: 5°
Made of stainless steel and autoclavable

Optimum use of valuable space:
The max. load per rack is 81 tubes (Ø 15-20 mm, length 160 mm). Fully loading the HettCubes with the racks results in the following capacities:

HettCube 200	HettCube 400	HettCube 600
6 racks = 486 tubes	16 racks = 1296 tubes	29 racks = 2349 tubes

Cat.No.: 60041

Frame L, 16-place

These flexible frames simplify handling, save time and enable the use of 16 tubes for different slant angles with 5° or 20°. The slant angle of the tubes can be very easily changed without the need for tools.

Made of stainless steel and autoclavable
Tube Ø: 15-20 mm
Tube lengths: 100-125 mm

Max. 3 racks possible per insertion shelf/drawer.

Cat.No.: 60027